12 Manholes in 8 Hours: Robotic vs Manual Sewer Cleaning

robotic operator cleaning the manhole using bandicoot.

A blocked manhole is more than a maintenance problem. It can become a public-health risk, a source of urban flooding, and a dangerous workplace for sanitation workers. For decades, many cities have depended on people to enter confined spaces and remove sludge, silt, plastics and other waste by hand. The work is physically demanding and can expose workers to toxic gases, pathogens, contaminated water and structural hazards.

12 Manholes in 8 Hours: Robotic vs Manual Sewer Cleaning


A blocked manhole is more than a maintenance problem. It can become a public-health risk, a source of urban flooding, and a dangerous workplace for sanitation workers. For decades, many cities have depended on people to enter confined spaces and remove sludge, silt, plastics and other waste by hand. The work is physically demanding and can expose workers to toxic gases, pathogens, contaminated water and structural hazards.

A new model is emerging: use a robot to enter the manhole while trained sanitation workers operate the system from above ground. Genrobotics’ Bandicoot is an example of this approach. It is designed to inspect and clean manholes without requiring human entry, helping cities move from hazardous manual scavenging to safer, technology-enabled sanitation operations.

The productivity potential is significant. A NITI Aayog Frontier Tech profile reports that Bandicoot can clean up to 12 manholes in 8 hours, while the same type of work could take more than two days and more than 12 workers manually. The figure is best understood as a reported field productivity benchmark, not a guarantee for every location. Actual output depends on the depth of the manhole, the amount and type of waste, access conditions, traffic management, weather, disposal arrangements and the condition of the sewer network.

Even with that qualification, the comparison shows why robotic sewer cleaning deserves attention from municipal corporations, urban development bodies and sanitation departments.

Manual sewer cleaning: the safety and productivity challenge


Manual cleaning often involves several separate tasks. A crew must locate and open the manhole, assess the site, manage traffic and public safety, remove covers, inspect the contents, extract waste and transport it for disposal. When conventional tools are insufficient, workers may be asked to enter the confined space.

That last step creates the greatest risk. Manholes may contain toxic gases and low-oxygen environments that are difficult to assess without appropriate instruments. Workers can also encounter sharp objects, unstable walls, contaminated water and heavy sludge. These risks make manual entry unacceptable as a routine sanitation method.

There is also a productivity problem. Manual cleaning can require a large crew, repeated lifting and significant time at each location. If waste is loaded and transported separately, the process becomes even slower. A city may therefore spend more on labour, safety arrangements and downtime while still struggling to maintain a consistent cleaning schedule.

The goal of automation is not to remove sanitation workers from the system. It is to remove them from the most dangerous part of the job and retrain them for safer, skilled roles as robot operators, supervisors and maintenance technicians.


How Genrobotics’ Bandicoot manhole cleaning robot works

Genrobotics describes Bandicoot as a remotely operated robotic system for manhole inspection and cleaning. The robot is lowered into the opening from a stable stand unit. Once inside, its robotic legs help it stabilise and move, while a six-degree-of-freedom arm mimics human arm movement to pick, shovel and collect waste.

Four HD cameras give the operator visibility inside the manhole. Gas detection supports hazard awareness during the operation. A purpose-built bucket lifts sludge, silt and debris out of the confined space and deposits the material into a designated container or vehicle. The operator remains above ground throughout the process.

According to Genrobotics, the standard Bandicoot can operate at depths of up to 12 metres. Its compact design is intended for narrow and difficult-to-access spaces, and its IP68-rated design is built for wet, demanding environments. These features make it more than a basic manhole cleaning machine. It combines inspection, removal and operator safety in one robotic workflow.

12 Manholes in 8 Hours: What Does the NITI Aayog Data Tell Us?

According to NITI Aayog, Genrobotics' Bandicoot robot can clean 12 manholes in just 8 hours. The same work can take more than two days when done manually and may require 12 or more workers.

Bandicoot makes the cleaning process faster by using a robotic arm to remove sludge and waste from manholes. The operator controls the robot from outside, reducing the need for workers to enter hazardous spaces.

This also reduces the physical effort involved in manual cleaning and helps sanitation workers avoid direct exposure to harmful gases and waste.

The impact of Bandicoot goes beyond cleaning operations. According to NITI Aayog, more than 3,000 sanitation workers have been trained to operate the robot. It has also been deployed in more than 20 Indian states and several Gulf countries.

This shows how Genrobotics is using robotics to make sewer cleaning faster, safer and more efficient.

Robotic vs manual sewer cleaning: a practical comparison

Worker safety

Manual cleaning can expose people to toxic gases, pathogens, falls and contact with sewage. A sewer cleaning robot keeps the machine in the hazardous space while trained operators work from above ground. Human entry should still be governed by applicable safety procedures and emergency protocols; robotics reduces routine exposure but does not remove the need for responsible site management.

Cleaning visibility

Manual crews may have limited visibility inside a dark, flooded or obstructed manhole. Bandicoot uses HD cameras and gas detection to give the operator live information while the robot works. This makes the system useful for both cleaning and inspection.

Productivity

A manual crew may spend substantial time on setup, entry, lifting and repeated handling. The NITI Aayog benchmark indicates that Bandicoot can clean up to 12 manholes in an 8-hour period under reported conditions. The correct procurement question is not simply “How fast is the robot?” It is “How many locations can the complete crew, vehicle, disposal and maintenance system safely service in a shift?”

Waste handling

Traditional cleaning may leave an additional transport and loading challenge after the waste is removed. Mobility+ addresses this with integrated collection, containment and dumping functions. This is where robotics in waste management can improve the entire workflow rather than only the extraction step.

Workforce development

A manual scavenging robot does not have to mean a job-replacement programme. Genrobotics says its deployments include operator training and the transition of sanitation workers into safer robotic-operator roles. Partnerships with bodies such as the National Safai Karamcharis Finance and Development Corporation can support the wider shift toward dignity, skills and safer livelihoods.

The bigger picture: robotics in waste management

Bandicoot is part of a much larger change. Robotics in waste management is slowly moving from a few trial projects to something cities rely on every day. And it's about more than just putting a sewer robot where a worker used to be.

Here's what that shift looks like on the ground:

  • Cities can finally see the work. Genrobotics' G-Crow platform tracks every robot by GPS, records photos of each cleaned manhole and creates reports automatically. Officials know which manholes were cleaned, when, and by whom.
  • Fixing problems before they happen. Because robots work faster, cities can clean manholes on a regular schedule instead of waiting for a blockage. That means fewer overflows and less flooding when the monsoon arrives.
  • Going beyond manholes. Wilboar cleans treatment plant wells, culverts and tanks, from Leh in Ladakh to Thiruvananthapuram airport.
  • Help in emergencies. When drains flood or collapse, remote-controlled robots can go where it's too risky to send a person. At the 2025 Maha Kumbh in Prayagraj, three Bandicoots worked around the clock.
  • Use in industry. Refineries, chemical plants and airports use the same robots to clean their own confined spaces.

Put simply, robotic sewer cleaning takes a job that used to be hidden, unrecorded and deadly, and turns it into a safe, visible public service.

A safer productivity model for Indian cities

The comparison between 12 manholes in 8 hours and more than two days of manual work is ultimately about more than speed. It is about designing sanitation work so that people do not have to risk their lives to keep cities functioning.

A well-managed robotic sewer cleaning programme can help municipal bodies increase daily coverage, create auditable cleaning records, improve inspection visibility and protect sanitation workers from routine confined-space entry. Genrobotics’ Bandicoot and Mobility+ show how a sanitation robot can combine these goals with operator training and integrated waste handling.

The future of urban sanitation should not be measured only by how much waste is removed. It should also be measured by whether the work is safe, dignified, traceable and sustainable. Turning manholes into “roboholes” is a practical step toward that standard.

Frequently Asked Questions(FAQ)

  1. What is a manhole cleaning robot?A manhole cleaning robot is a remotely operated machine that enters a manhole to inspect and remove sludge, silt, debris and other waste. Genrobotics’ Bandicoot uses a robotic arm, cameras, gas detection and a bucket system so the operator can work from above ground

    How many manholes can Bandicoot clean in 8 hours?The NITI Aayog Frontier Tech Repository reports that Bandicoot can clean up to 12 manholes in 8 hours, compared with more than two days and more than 12 workers manually. Actual results will vary by site conditions, waste load, access, crew experience and disposal arrangements.
  2. How does a robotic sewer cleaning machine protect workers?The robot enters the hazardous confined space while the trained operator controls it from above ground. Cameras provide visibility and gas sensors help identify hazardous conditions. This reduces the need for routine human entry, although every operation still requires appropriate site safety procedures
  3. Will a manhole cleaning robot take away workers' jobs? No, and that's an important point. The same workers are trained to operate the robot from above ground. More than 3,000 have been trained so far, and many say the new role brings more respect and better health.
  4. How does Genrobotics' Bandicoot robot clean manholes?Bandicoot uses a multi-jointed robotic arm, robotic legs, HD cameras, gas-detection technology and a specialised bucket mechanism. The operator controls the machine remotely to inspect the manhole and remove accumulated sludge, silt and solid waste without entering the hazardous space.